Clik here to view.
Diodes’ AP33771C and AP33772S sink controllers enable designers to transition from proprietary charging ports, legacy USB ports, and barrel-jack ports to a standard USB Type-C PD 3.1 port. These controllers can be embedded into battery-powered devices and other types of equipment using a USB Type-C socket as a power source.
Image may be NSFW.
Clik here to view.
Both ICs manage DC power requests for devices with USB Type-C connectors, supporting the PD 3.1 extended power range (EPR) of up to 140 W and adjustable voltage supply (AVS) of up to 28 V. The AP33771C provides multiple power profiles for systems without an MCU, featuring eight resistor-settable output voltage levels and eight output current options. In contrast, the AP33772S uses an I2C communications interface for systems equipped with a host MCU.
The sink controllers’ built-in firmware supports LED light indication, cable voltage-drop compensation, and moisture detection. It also offers safety protection schemes for overvoltage, undervoltage, overcurrent, and overtemperature. No programming is required to activate the firmware in the AP33771C, while designers have the option of using I2C commands to configure the AP33772S.
Housed in a 3×3-mm, 14-pin DFN package, the AP33771C is priced at $0.79 each in 1000-unit quantities. The AP33772S, in a 4×4-mm, 24-pin QFN package, costs $0.84 each in like quantities.
Find more datasheets on products like this one at Datasheets.com, searchable by category, part #, description, manufacturer, and more.
The post Sink controllers ease shift to USB-C PD appeared first on EDN.
